,x, xz, x,x, x,x, x,x, x,x, x,x, x,x, x,x, x,x, x,x, x,x, x,x, x,x, x,x, x,x, x,x, x,x, x,x, x,x, x,x, x,x, x,x, x,x, x,x, x,x, x,x, x,x, x,x, x,x, x,x, x,x, x,x, x,x, x,x, x,x, x,x, x,x, x,x, x,x, x,x, x,x, x,x, x,x, x,

Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.

Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.

True or false (explain) (110)[111] is a slip system in bcc metals . the {111} family in fcc contains 8 planes. resolved shear stress (rss) in single crystals is just related to the applied stress. critical resolved shear stress (crss) in single crystal metals is direct proportional to the number of defects in the structure