subject
Engineering, 31.12.2020 18:40 jpwalker8535

تابسيءلؤارتتالبسئءبؤلناتاتةىبئئءلؤا لن0

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 19:20
Acarnot refrigerator operates in a room in which the temperature is 21°c and of power when operating. if the food compartment of the refrigerator is consumes 3 kw to be maintained at 2°c, determine (a) the coefficient of performance of the cycle and (b) the rate of heat removal from the food compartment. refrigerator cycle that has a higher coefficient of performance than that of the discussed (e) is it possible to develop a carn ot refrigerator, operating between the same temperature limits? explain
Answers: 2
question
Engineering, 06.07.2019 04:10
Consider a power plant with water as the working fluid that operates on an ideal rankine cycle. it has a net power output of 45mw. superheated steam enters the turbine at 7mpa and 500°c (h=3411.4 kj/kg; s=6.8 kj/kg k) and is cooled in the condenser at a pressure of 10 kpa by running cooling water from a lake through the tubes of the condenser at a rate of 2000 kg/s. (a) show the cycle on a t-s diagram (a right schematic is fine - you do not need to calculate the temperatures at each point); (b)-determine the work done by the turbine and the pump in kj/kg; (c)-the mass flow rate of water used by the power plant; (d)-the thermal efficiency of the cycle; (e)-the temperature rise of the cooling water. assume the cooling water is incompressible with cp 4.18 kj/kg°c.
Answers: 3
question
Engineering, 06.07.2019 04:10
Steam enters a converging nozzle at 3.0 mpa and 500°c with a negligible velocity, and it exits at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: is isentropic (a) (b) has an efficiency of 94 percent
Answers: 1
question
Engineering, 06.07.2019 04:30
At flow nozzle is to be installedin a 5-in type k copper tube carrying linseed oil at 77 f. a mercury manometer is to be used to measure the pressure difference across the nozzle when the expected range of the flow rate is from 700 galmin to 1000 gal/min. the manometer scale ranges from 0 to 8.0 in of mercury determine an appropriate diameter of the nozzle.
Answers: 2
You know the right answer?
تابسيءلؤارتتالبسئءبؤلناتاتةىبئئءلؤا لن0...
Questions
question
Mathematics, 17.09.2020 04:01
question
German, 17.09.2020 04:01
question
Mathematics, 17.09.2020 04:01
question
Mathematics, 17.09.2020 04:01
question
Mathematics, 17.09.2020 04:01
question
Mathematics, 17.09.2020 04:01
question
English, 17.09.2020 04:01
question
French, 17.09.2020 04:01
question
English, 17.09.2020 04:01
question
English, 17.09.2020 04:01
question
Mathematics, 17.09.2020 04:01
question
Mathematics, 17.09.2020 04:01
question
German, 17.09.2020 04:01
question
Mathematics, 17.09.2020 04:01
question
Mathematics, 17.09.2020 04:01
question
Mathematics, 17.09.2020 04:01
question
Mathematics, 17.09.2020 04:01
question
Mathematics, 17.09.2020 04:01
question
Mathematics, 17.09.2020 04:01
question
Mathematics, 17.09.2020 04:01
Questions on the website: 13722367