subject
Engineering, 16.12.2020 16:10 carlosiscr7

Question 1 You are designing an asphalt pavement to be used on a highway that sees little traffic (i. e. constant movement > 55 mph) in central Michigan. The average 7-day maximum temperature that the pavement will experience is will be 40*C. The minimum temperature that the pavement will experience is -31*C Given this information: answer the following questions 1. What performance grade should the asphalt be

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.
Answers: 2
question
Engineering, 04.07.2019 18:10
The higher the astm grain size number, the finer the gran is. a)-true b)-false
Answers: 2
question
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
question
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
You know the right answer?
Question 1 You are designing an asphalt pavement to be used on a highway that sees little traffic (i...
Questions
question
Biology, 23.06.2021 20:40
question
Mathematics, 23.06.2021 20:40
question
Mathematics, 23.06.2021 20:40
question
Mathematics, 23.06.2021 20:40
Questions on the website: 13722363