Engineering, 14.12.2020 01:00 alex7881

Please Help ASAP Follow the steps below to calculate the reaction forces at points A and C.

1. List the Static Equilibrium equations.
2. List all known and unknown forces acting and reacting on the truss structure. Label the direction of the force with an arrow. . Find the moment forces. Determined from Pin A .
3. Use the moment static equilibrium equation acting upon pin A to solve for
4. Solve for unknown reaction force in the x direction (). Use the sum of forces in the x direction equilibrium equation.
5. Solve for unknown reaction forces in the y direction. Use the sum of forces in the y direction equilibrium equation.

**Please Help ASAP**

Follow the steps below to calculate the reaction forces at points A and C.
1

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

Answer

Engineering, 04.07.2019 18:10

During a steady flow process, the change of energy with respect to time is zero. a)- true b)- false

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer

Answers: 2

Answer

You know the right answer?

**Please Help ASAP** Follow the steps below to calculate the reaction forces at points A and C.

Questions