Engineering, 12.12.2020 17:10 yejinschoi3007
It is desirable to model a battery by its Thevenin equivalent. To do this, two precision resistors are used. In particular, a 25 Ohm resistor gives a 20 V drop and a 15 Ohm resistor gives a 15 V drop. The Thevenin's equivalent resistance is most nearly
1. 100 ohms
2. 75 Ohms
3. 25 Ohms
4. 15 Ohms
5. 40 Ohms
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise
Answers: 3
Engineering, 04.07.2019 18:10
Burgers vector is generally parallel to the dislocation line. a)-true b)-false
Answers: 2
Engineering, 04.07.2019 18:10
Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i.d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.
Answers: 3
Engineering, 04.07.2019 18:20
Air is compressed isentropically from an initial state of 300 k and 101 kpa to a final temperature of 1000 k. determine the final pressure using the following approaches: (a) approximate analysis (using properties at the average temperature) (b) exact analysis
Answers: 1
You know the right answer?
It is desirable to model a battery by its Thevenin equivalent. To do this, two precision resistors a...
Questions
History, 22.11.2019 19:31
English, 22.11.2019 19:31
Mathematics, 22.11.2019 19:31
Social Studies, 22.11.2019 19:31
Mathematics, 22.11.2019 19:31
Arts, 22.11.2019 19:31
