A vapor mixture of n-butane (B) and n-hexane (H) contains 50.0 mole% butane at 120 °C and 1 atm. A stream of this mixture flowing at a rate of 150.0 L/s is cooled and compressed, causing some but not all of the vapor to condense. (Treat this process as a single-unit operation.) Liquid and vapor product streams emerge from the process in equilibrium at T (°C) and 1100 mmHg. The vapor product contains 60.0 mole% butane. Determine: a)The required final temperature (T) b)The composition of the liquid product (component mole fractions) c)The molar flow rates of the liquid and vapor products.

1

explanation:

answer:

understeer generally occurs when the front tyres start slipping while you go around the curve.

explanation:

hope it !

One of the benefits of working with chlorinated polyvinyl chloride (CPVC) pipe is that it can be cut with a variety of different tools that don’t require any electricity or heat. However, different cutting methods are preferred over others, depending on the application.

When cutting CPVC pipe, it is important to make a square, flat cut. An uneven cut limits the bonding area and weakens the fitting.

To help you make the best possible cut, we’ve put together the following dos and don’ts when cutting CPVC pipe in different situations.

answer:

0.0

Explanation: