8. Removing damage by tapping it out with a hammer
and dolly is often referred to as
(A) cont...
Engineering, 05.12.2020 03:00 CoolDudeTrist
8. Removing damage by tapping it out with a hammer
and dolly is often referred to as
(A) contouring
(B) roughing out
(C) forming
(D) tapping out
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody
Answers: 2
Engineering, 04.07.2019 18:20
Avolume of 2.65 m3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 264 k, 5.6 bar. the air receives 432 kj by work from the paddle wheel. assuming the ideal gas model with cv = 0.71 kj/kg • k, determine for the air the amount of entropy produced, in kj/k
Answers: 2
Engineering, 04.07.2019 18:20
Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.
Answers: 3
Engineering, 04.07.2019 19:20
Acircular pipe of 30mm outside diameter is placed in an airstream at 30 c and latm pressure. the air moves in cross flow over the pipe at 20 m/s, while the outer surface of the pipe is maintained at 110 c. what is the drag force exerted on the pipe per unit length? what is the rate of heat transfer from the pipe per unit length?
Answers: 1
You know the right answer?
Questions
Chemistry, 15.04.2020 23:58
Mathematics, 15.04.2020 23:58
Mathematics, 15.04.2020 23:58
Social Studies, 15.04.2020 23:58
Mathematics, 15.04.2020 23:58
Mathematics, 15.04.2020 23:59
Chemistry, 15.04.2020 23:59
History, 15.04.2020 23:59
Mathematics, 15.04.2020 23:59
