Engineering, 01.12.2020 18:00 hesterkl1225

25 points and brainliest is it A, B, C, D Which option distinguishes the PPE violations in the following scenario that could lead to the most serious injury?
Rey is mixing different liquids for the farm's special pesticide blend. The containers are heavy and awkward to handle. Rey is wearing coveralls, with an apron slung over his shoulder, and safety goggles around his neck; he is wearing leather gloves and tennis shoes. Rey's supervisor walks in and immediately tells him to stop working. Rey is then written up for not following shop safety rules regarding PPE.

A. having an apron over his shoulder
B. having safety goggles around his neck
C. wearing leather gloves instead of nitrile gloves
D. wearing tennis shoes instead of steel-toed boots

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

The higher the astm grain size number, the finer the gran is. a)-true b)-false

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.

Answers: 3

Answer

Engineering, 04.07.2019 19:10

Afoot bridge is made as a simple deck, 4 m long, with a cross section 2 m (wide) and 20 cm thick, and made of wood. the deck is supported at the two ends. the maximum load allowable on the bridge is 10 tons, provided it is uniformly distributed on the deck. to sense this load, a strain gauge is placed at the center of the bridge and its resistance is monitored. if the sensor has a nominal resistance of 350 s2 and a gauge factor of 3.6, what is the reading of the strain gauge at maximum load? the modulus of elasticity for the wood used in the construction is 10 gpa.

Answers: 2

Answer

You know the right answer?

25 points and brainliest is it A, B, C, D Which option distinguishes the PPE violations in the foll...

Questions