subject
Engineering, 29.11.2020 22:50 xeno777

An automotive fuel has a molar composition of 85% ethanol (C2H5OH) and 15% octane (C8H18). For complete combustion in air, determine: (a) the molar air-fuel ratio and air-fuel ratio by mass. (b) the lower heating value, in kJ per kmol of fuel and in kJ per kg of fuel.(c) the higher heating value, in kJ per kmol of fuel and in kJ per kg of fuel. (d) the dew point temperature of the combustion products at 1 atm, in Ā°C. Consider a reference temperature and pressure of 25Ā°C, 1 atm.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20Ā°c. air approaches the tube bank in the normal direction at 0Ā°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5Ā°c and 1 atm. is this a good assumption?
Answers: 1
question
Engineering, 04.07.2019 18:10
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
question
Engineering, 04.07.2019 18:20
A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200Ā°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.
Answers: 3
question
Engineering, 04.07.2019 19:10
What is creep? what is stress relaxation?
Answers: 1
You know the right answer?
An automotive fuel has a molar composition of 85% ethanol (C2H5OH) and 15% octane (C8H18). For compl...
Questions
question
Mathematics, 01.12.2020 23:50
question
Mathematics, 01.12.2020 23:50
question
Computers and Technology, 01.12.2020 23:50
Questions on the website: 13722360