Engineering, 25.11.2020 22:10 jhenifelix
1) What is the diameter of Gear E?
2) To which axles would you attach the motor and driven wheels in order to achieve the highest torque?
3) Axle K is supplying rotary motion to a rotary grain mill. A torque of at least 110 ft-lb is required to overcome the static forces of the mixing shaft to start the process. What is the minimum torque needed at Axle A to start the mixing process?
4) Assuming the conditions in question #3, what is the new torque out at Axle P?
5) Gear B breaks. You have the option of replacing Gear B with any of the following 4 gear sizes: 0.5 m, 0.75 m, 1 m, and 1.3 m. Which gear size would you use to maximize the speed of this train, assuming Axle P is the motor/input and Axle A is the output? 0.5m, 0.75m, 1m, 1.3m, or the gear size will not impact the calculation
6) Gear G breaks. You have the option of replacing Gear G with any of the following 4 gear sizes: 0.5 m, 0.75 m, 1 m, and 1.3 m. Which gear size would you use to maximize the torque of this train, assuming Axle P is the motor/input and Axle A is the output?
(The answers are the same options that question 5 has)*
7) Gear E breaks. You have the option of replacing Gear E with any of the following 4 gear sizes: 0.5 m, 0.75 m, 1 m, and 1.3 m. Which gear size would you use to maximize the torque of this train, assuming Axle B is the motor/input and Axle M is the output?
(The answers are the same options as the ones in questions 5 and 6)*
*Any help would be very much appreciated, thank you*
Answers: 2
Engineering, 03.07.2019 15:10
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
Engineering, 04.07.2019 18:10
Burgers vector is generally parallel to the dislocation line. a)-true b)-false
Answers: 2
Engineering, 04.07.2019 18:10
Which of the following controllers anticipates the future from the slope of errors over time? a)-proportional b)-on/off c)-integral d)-derivative.
Answers: 2
Engineering, 04.07.2019 18:10
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
1) What is the diameter of Gear E?
2) To which axles would you attach the motor and driven wheels i...
Mathematics, 17.05.2021 19:10
English, 17.05.2021 19:10
History, 17.05.2021 19:10
Social Studies, 17.05.2021 19:10
Mathematics, 17.05.2021 19:10
Geography, 17.05.2021 19:10
Mathematics, 17.05.2021 19:10
Mathematics, 17.05.2021 19:10
Mathematics, 17.05.2021 19:10
Mathematics, 17.05.2021 19:10
Mathematics, 17.05.2021 19:10