Engineering, 22.11.2020 19:10 haileysolis5
A flat plate weighting 0.45KN has a surface area of 0.1m2. Its slides down to an inclined plane of 30 degree to the horizontal at a constant speed of 3 m/s if the inclined plate is lubricated with an oil of viscosity 0.1 N. s/m2 find the thickness of oil film
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
Engineering, 04.07.2019 18:10
Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?
Answers: 3
Engineering, 04.07.2019 18:10
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
You know the right answer?
A flat plate weighting 0.45KN has a surface area of 0.1m2. Its slides down to an inclined plane of 3...
Questions
Mathematics, 22.10.2019 19:00
English, 22.10.2019 19:00
Business, 22.10.2019 19:00
Advanced Placement (AP), 22.10.2019 19:00
