subject
Engineering, 18.11.2020 16:50 breannaratliff23

Air enters the compressor of an ideal Brayton refrigeration cycle at 100 kPa, 300K. The compressor pressure ratio is 3.75, and the temperature at the turbine inlet is 350K. Determine the (a) net work input, per unit mass of air flow, in kJ/kg. (b) refrigeration capacity, per unit mass of air flow, in kJ/kg. (c) coefficient of performance. (d) coefficient of performance of a Carnot refrigeration cycle operating between thermal reservoirs at Tc = 300K and Th = 350K, respectively.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
question
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
question
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
question
Engineering, 04.07.2019 18:10
You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?
Answers: 1
You know the right answer?
Air enters the compressor of an ideal Brayton refrigeration cycle at 100 kPa, 300K. The compressor p...
Questions
question
Social Studies, 17.10.2019 18:30
question
Computers and Technology, 17.10.2019 18:30
Questions on the website: 13722367