Engineering, 18.11.2020 08:20 paytum314

Air enters the diffuser of a turbojet engine with a mass flow rate of 39 kg/s at 62 kPa, 233 K, and a velocity of 225 m/s. The pressure ratio for the
compressor is 12, and its isentropic efficiency is 88%. Air enters the turbine at
1333 K with the same pressure as at the exit of the compressor. Air exits the
nozzle and turbine have isentropic efficiencies of 92% and 90%, respectively.
On the basis of an air-standard analysis, calculate
(a) the rate of heat addition, in kJ/h.
(b) the pressure at the turbine exit, in kPa.
(c) the compressor power input, in kJ/h.
(d) the velocity at the nozzle exit, in m/s.
(e) the thrust provided by the engine.

Answers: 2

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k

Answers: 2

Answer

You know the right answer?

Air enters the diffuser of a turbojet engine with a mass flow rate of 39 kg/s at 62 kPa, 233 K, and...

Questions