Engineering, 17.11.2020 23:40 lefarrioe8621

The amount of moisture is represented in the Wildfire Explorer by the drought level. Click the Terrain Setup button to adjust the drought level. Then, place a spark in each zone and run the model.

Watch how the wildfires spread in each zone.

How does drought level affect the spread of wildfires?

Vegetation with a low drought level will burn quickly
Vegetation with a high drought level will burn quickly
Vegetation with a high drought level will burn slowly
The drought level of vegetation has little effect on the spread of wildfires

What side of the fire triangle does drought affect?

Oxygen
Heat
Fuel

Now, experiment with wind speed and direction. You can change the wind speed and direction on the second page of the Terrain Setup menu.

How does wind speed and direction affect the spread of wildfires?

What side of the fire triangle does wind correspond to?

Oxygen
Heat
Fuel

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Aloaded platform of total mass 500 kg is supported by a dashpot and by a set of springs of effective stiffness 72 kn/m. it is observed that when the platform is depressed through a distance x = 12.5 cm below its equilibrium position and then released without any initial velocity; it reaches its equilibrium position in the shortest possible time without overshoot. find the position and velocity of the loaded platform 0.10 sec. after its release. if a further load of 400 kg is added to the platform, find, i) the frequency of damped vibrations, and i) the amplitude of vibration after 2 complete oscillations, given that the initial amplitude is 15 cm.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

The higher the astm grain-size number, the coarser the grain is. a)-true b)-false

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Vibration monitoring this technique uses the noise or vibration created by mechanical equipment and in seme cases by plant systems to detemine their actual condtion. a)- true b)- false

Answers: 2

Answer

You know the right answer?

The amount of moisture is represented in the Wildfire Explorer by the drought level. Click the Terra...

Questions