Magnetic Particle Inspection
a. Describe what the test is:
b. What is being tested?
c....
Engineering, 17.11.2020 03:10 Sjanaya853
Magnetic Particle Inspection
a. Describe what the test is:
b. What is being tested?
c. How is the test done?
d. What kind of tools are used to test?
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise
Answers: 3
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20
Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above
Answers: 1
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
You know the right answer?
Questions
Mathematics, 01.07.2019 04:20
Mathematics, 01.07.2019 04:20
Mathematics, 01.07.2019 04:20
Mathematics, 01.07.2019 04:20
History, 01.07.2019 04:20
Mathematics, 01.07.2019 04:20
English, 01.07.2019 04:20
Physics, 01.07.2019 04:20
Mathematics, 01.07.2019 04:20
Mathematics, 01.07.2019 04:20
History, 01.07.2019 04:20
