Engineering, 11.11.2020 18:10 fantasticratz2

Using the following data, determine the percentage retained, cumulative percentage retained, and percent passing for each sieve. Sieve size Weight retained (g) No. 4 59.5 No. 8 86.5 No. 16 138.0 No. 30 127.8 No. 50 97.0 No. 100 66.8 Pan 6.3

Answers: 1

Show answers

Answers

Answer from: Elexis8591

Solution :

Sieve Size (in) Weight retain(g)

3 1.62

2 2.17

$1\frac{1}{2}$ 3.62

$\frac{3}{4}$ 2.27

$\frac{3}{8}$ 1.38

PAN 0.21

Given :

Sieve weight % wt. retain % cumulative % finer

size retained wt. retain

No. 4 59.5 10.225% 10.225% 89.775%

No. 8 86.5 14.865% 25.090% 74.91%

No. 16 138 23.7154% 48.8054% 51.2%

No. 30 127.8 21.91% 70.7154% 29.2850%

No. 50 97 16.6695% 87.3849% 12.62%

No. 100 66.8 11.4796% 98.92% 1.08%

Pan 6.3 1.08% 100% 0%

581.9 gram

Effective size = percentage finer 10% ( $$$D_{20}$ )

0.149 mm, N 100, % finer 1.08

0.297, N 50 , % finer 12.62%

x , 10%

$y-1.08 = \frac{12.62 - 1.08}{0.297 - 0.149}(x-0.149)$

$(10-1.08) \times \frac{0.297 - 0.149}{12.62 - 1.08}+ 0.149=x$

x = 0.2634 mm

Effective size, $D_{10} = 0.2643 \ mm$

Now, N 16 (1.19 mm) , 51.2%

N 8 (2.38 mm) , 74.91%

x, 60%

$60-51.2 = \frac{74.91-51.2}{2.38-1.19}(x-1.19)$

x = 1.6317 mm

$\therefore D_{60} = 1.6317 \ mm$

Uniformity co-efficient = $\frac{D_{60}}{D_{10}}$

$Cu= \frac{1.6317}{0.2643}$

Cu = 6.17

Now, fineness modulus = $\frac{\Sigma \text{\ cumulative retain on all sieve }}{100}$

$=\frac{\Sigma (10.225+25.09+48.8054+70.7165+87.39+98.92+100)}{100}$

= 4.41

which lies between No. 4 and No. 5 sieve [4.76 to 4.00]

So, fineness modulus = 4.38 mm

Answer from: Quest

no he didnt use it

explanation:

he said no

Answer from: Quest

There are three main types of elevators commonly used: traction with a machine room, machine-room-less traction, and hydraulic; however, there are variations on each type.

Another question on Engineering

Engineering, 03.07.2019 14:10

Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i.d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k

Answers: 2

Answer

You know the right answer?

Using the following data, determine the percentage retained, cumulative percentage retained, and per...

Questions