subject
Engineering, 10.11.2020 21:50 briiannamb

If a 1-inch water pipe enters a basement wall and must be extended to the ceiling, a should be used. a. 1 1/2-inch three-way elbow

b. street or service elbow

c. 3/4-inch 90-degree service elbow, galvanized

d. 1-inch 90-degree elbow, galvanized, malleable iron, screw

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 19:30
When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line
Answers: 3
question
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
question
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
question
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
You know the right answer?
If a 1-inch water pipe enters a basement wall and must be extended to the ceiling, a should be used....
Questions
question
Biology, 01.12.2020 19:50
question
Mathematics, 01.12.2020 19:50
question
History, 01.12.2020 19:50
question
Computers and Technology, 01.12.2020 19:50
Questions on the website: 13722363