Engineering, 09.11.2020 21:20 hallmansean04
There is a steel tank with a 6 mm thick thin-walled mantle containing a gas under pressure. The Strain Gauge located in the mantle at 22.5º from the axial direction measured a 100 με deformation with increasing pressure from atmospheric pressure, determine:
1)Internal pressure.
2)Pond volume variation percentage (flat heads).
3)Maximum shear stress in the pond mantle.
Data: E = 2.1 x 1011 N / m2; v = 0.3.
Answers: 3
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
Engineering, 04.07.2019 18:10
Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.
Answers: 1
Engineering, 04.07.2019 18:10
Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.
Answers: 2
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
There is a steel tank with a 6 mm thick thin-walled mantle containing a gas under pressure. The Stra...
Chemistry, 10.12.2020 05:40
Mathematics, 10.12.2020 05:40
History, 10.12.2020 05:40
Mathematics, 10.12.2020 05:40
Mathematics, 10.12.2020 05:40
Mathematics, 10.12.2020 05:40
Mathematics, 10.12.2020 05:40
Biology, 10.12.2020 05:40
English, 10.12.2020 05:40
Mathematics, 10.12.2020 05:40