Engineering, 07.11.2020 20:30 kaitlyn114433

PLEASE HELP (Its due today pls help) I will give 40 points 1.
What is the amperage rating of an electrical device that uses 12 kilowatts of electricity when operated for 6 hours in a 120-volt circuit?

2.
How many watts will be used in 16 hours if an electric motor requires 5.5 amperes of electricity, and is on a 120 volt electrical circuit 10 hours?

3.
An agricultural mechanics shop has five 120 watt lights, a 700-watt saw and a 120-watt fan that were used for 6 hours. How many KILOWATTS of electricity were used?

4.
What is the amperage of a circuit with ten 100 watt light bulbs in a 120-volt circuit?

5.
If electricity costs $0.12 per kilowatt hour, how much does it cost to operate a router which requires 12 amperes of electricity and is used in a 120 volt electrical circuit for 4 hours?

6.
If the local rate for electricity is $.11 per kilowatt hour, how much should the electric bill be for 240 kilowatt hours?

7.
If the local rate for electricity is $0.07 per kilowatt hour, how much does it cost to operate an electric motor requiring 25 amperes of electricity if used in a 120 volt circuit for one hour?

8.
What is the watt rating of a portable electric drill with 40 amps and 120 volts?

9.
How many watts of current does an electric motor which requires 10 amperes of electricity and is designed to be used in a 120 volt electrical circuit use in one hour?

10.
How many kilowatts of current does a portable saw that requires 12 amperes of electricity and is designed to be used in a 120-volt electrical circuit use in one hour?

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Items are similar to the free issue items, but their access is limited. (clo5) a)-bin stock items free issue b)-bin stock controlled issue c)-critical or insurance spares d)-rebuildable spares e)-consumables

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Along 8-cm diameter steam pipe whose external surface temperature is 900c connects two buildings. the pipe is exposed to ambient air at 70c with a wind speed of 50 km/hr blowing across the pipe. determine the heat loss from the pipe per unit length. (b) air at 500c enters a section of a rectangular duct (15 cm x 20 cm) at an average velocity of 7 m/s. if the walls of the duct are maintained at 100c. a) the length of the tube for an exit temperature of the air to be 40 0c. b)the rate of heat transfer from the air. c) the fan power needed to overcome the pressure drop in this section of the duct.

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Aheavily insulated piston-cylinder device contains 0.02 m3 of steam at 300 kpa and 200 °c. 1.2 mpa. d this process. team is now compressed in a reversible manner to a pressure of etermine the entropy change and the work done on the steam during this process

Answers: 1

Answer

You know the right answer?

PLEASE HELP (Its due today pls help) I will give 40 points 1.
What is the amperage rating of...

Questions