Engineering, 06.11.2020 02:50 escojo2508
If a weld is laying into a joint with a concave weld contour with undercutting issues, what might be the cause?
A. Spatter build up on the gun parts
B. Not enough gel applied to the top
C. Base metal in not cooled properly
D. Voltage of the machine is set too high
Answers: 3
Engineering, 04.07.2019 18:10
Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.
Answers: 1
Engineering, 04.07.2019 18:20
Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]
Answers: 1
Engineering, 04.07.2019 19:10
For a process taking place in a closed system containing gas, the volume and pressure relationship is pvi-constant. -1.5 bar, the process starts with initial conditions, pi = =0.03 m3 and ends with final volume, v2-0.05 m3 determine the work done by the gas.
Answers: 2
Engineering, 04.07.2019 19:20
Acarnot refrigerator operates in a room in which the temperature is 21°c and of power when operating. if the food compartment of the refrigerator is consumes 3 kw to be maintained at 2°c, determine (a) the coefficient of performance of the cycle and (b) the rate of heat removal from the food compartment. refrigerator cycle that has a higher coefficient of performance than that of the discussed (e) is it possible to develop a carn ot refrigerator, operating between the same temperature limits? explain
Answers: 2
If a weld is laying into a joint with a concave weld contour with undercutting issues, what might be...
Biology, 28.09.2019 23:50
Mathematics, 28.09.2019 23:50
Advanced Placement (AP), 28.09.2019 23:50
Mathematics, 28.09.2019 23:50
History, 28.09.2019 23:50
Mathematics, 28.09.2019 23:50
Mathematics, 28.09.2019 23:50
Mathematics, 28.09.2019 23:50
Biology, 28.09.2019 23:50
History, 28.09.2019 23:50
Mathematics, 28.09.2019 23:50