Engineering, 02.11.2020 17:20 gerkera88
a circular pile, 19 m long is driven into a homogeneous sand layer. The piles width is 0.5 m. The standard penetration resistance near the vicinity of the pile is 25. Calculate the allowable bearing force (Qa) of the pile. Use
Answers: 2
Engineering, 04.07.2019 18:10
The temperature of air decreases as it is compressed by an adiabatic compressor. a)- true b)- false
Answers: 2
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
Engineering, 04.07.2019 18:20
How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s
Answers: 2
Engineering, 04.07.2019 18:20
For a gate width of 2 m into the paper, determine the force required to hold the gate abc at its location.
Answers: 1
a circular pile, 19 m long is driven into a homogeneous sand layer. The piles width is 0.5 m. The st...
Mathematics, 03.09.2021 09:20
Biology, 03.09.2021 09:20
Mathematics, 03.09.2021 09:20
English, 03.09.2021 09:20
World Languages, 03.09.2021 09:30
Engineering, 03.09.2021 09:30
English, 03.09.2021 09:30
Computers and Technology, 03.09.2021 09:30
Mathematics, 03.09.2021 09:30