Engineering, 02.11.2020 16:30 kkruvc
The following is a photomicrograph of the surface of a polished and etched polycrystalline specimen of an iron-chromium alloy with the grain boundaries revealed as dark lines. Determine: (i) the mean intercept length �� of the grains in millimeters, and (ii) the ASTM grain size number, G. (For part (i), use at least seven straight line segments for the determination).
Answers: 3
Engineering, 03.07.2019 15:10
If you were designing a bumper for a car, would you prefer it to exhibit elastic or plastic deformation? why? consider the functions of a bumper in both a minor "fender-bender" and a major collision.
Answers: 1
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
Engineering, 04.07.2019 18:20
The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?
Answers: 3
Engineering, 04.07.2019 19:10
With increases in magnification, which of the following occur? a. the field of view decreases. b. the ambient illumination decreases. c. the larger parts can be measured. d. the eyepiece must be raised.
Answers: 1
The following is a photomicrograph of the surface of a polished and etched polycrystalline specimen...
Mathematics, 24.06.2019 02:40
Computers and Technology, 24.06.2019 02:50
Geography, 24.06.2019 02:50
Chemistry, 24.06.2019 02:50
Mathematics, 24.06.2019 02:50