Which of the following explains why sub-surface mining is more dangerous than surface mining? Sub-surface miners deal with toxic air conditions in addition to surface mining hazards such as sinkholes, machine injuries, and loud noises.

Sub-surface miners deal with loud noises in addition to surface mining hazards such as toxic air conditions, sinkholes, and machine injuries.

Sub-surface miners deal with hazardous chemicals in addition to surface mining hazards such as toxic air conditions, sinkholes, and loud noises.

Sub-surface miners deal with machine injuries in addition to surface mining hazards such as toxic air conditions, sinkholes, and loud noises.

Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.

An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)

Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.