Engineering, 28.10.2020 17:10 coopera1744
1. Make sure the inputs are set to df = 20 and p-value of 0.05 (critical value for t will adjust automatically). Now reduce degrees of freedom to 15, then to 10, and then to 5. What happens to the critical value for t?
Answers: 1
Engineering, 04.07.2019 18:10
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
Engineering, 04.07.2019 19:10
The sum of the normal stresses does not change as the stress state rotates through an angle. a)-trune b)- false
Answers: 2
Engineering, 04.07.2019 19:10
What are the major differences between injection molding and extrusion?
Answers: 2
Engineering, 04.07.2019 19:20
Apiping systems consists of 6 m of 6-std type k and 12 m of 4-std type k, both drawn copper tubing. the system conveys ethylene glycol at a rate of 0.013 m3/s. the pressure drop across the system is to be calculated. there are two 90° elbows in the 6-in pipe, a reduction from the 6-in pipe to the 4-in pipe and four 90° elbows in the 4-in pipe. all fittings are soldered (same as flanged) and regular. the inlet and outlet of the system are at the same height.
Answers: 1
1. Make sure the inputs are set to df = 20 and p-value of 0.05 (critical value for t will adjust aut...
World Languages, 27.02.2021 23:30
Mathematics, 27.02.2021 23:30
Mathematics, 27.02.2021 23:30
Computers and Technology, 27.02.2021 23:30
Computers and Technology, 27.02.2021 23:30
Computers and Technology, 27.02.2021 23:30
Mathematics, 27.02.2021 23:30
Geography, 27.02.2021 23:30
Chemistry, 27.02.2021 23:30
Engineering, 27.02.2021 23:30