subject
Engineering, 28.10.2020 03:20 natetheman7740

Note that common activities are listed toward the top, and less common activities are listed toward the bc According to O*NET, what are common work activities performed by Veterinarians? Check all that apply.
documenting/recording information
* repairing electronic equipment
making decisions and solving problems
* operating large vehicles
✓ working directly with the public
updating and using relevant knowledge


Note that common activities are listed toward the top, and less common activities are listed toward

ansver
Answers: 3

Another question on Engineering

question
Engineering, 06.07.2019 04:10
Consider a power plant with water as the working fluid that operates on an ideal rankine cycle. it has a net power output of 45mw. superheated steam enters the turbine at 7mpa and 500°c (h=3411.4 kj/kg; s=6.8 kj/kg k) and is cooled in the condenser at a pressure of 10 kpa by running cooling water from a lake through the tubes of the condenser at a rate of 2000 kg/s. (a) show the cycle on a t-s diagram (a right schematic is fine - you do not need to calculate the temperatures at each point); (b)-determine the work done by the turbine and the pump in kj/kg; (c)-the mass flow rate of water used by the power plant; (d)-the thermal efficiency of the cycle; (e)-the temperature rise of the cooling water. assume the cooling water is incompressible with cp 4.18 kj/kg°c.
Answers: 3
question
Engineering, 06.07.2019 04:30
List three applications of coordinate measuring machine (cmm)
Answers: 3
question
Engineering, 06.07.2019 05:10
Apipe of diameter 200 mm (constant) carrying water with an 5 mis and total head is density 1000 kg/m ) with velocity tpward slope. at a certain point, where the elevation is 5 m above a datum,the 21.5 m. a) determine the pressure of the pipe at 5m elevation. determine the pressure at elevation 10m (above same datum) if the of total head at 5m elevation.
Answers: 1
question
Engineering, 06.07.2019 05:20
An industrial centrifugal air compressor has 34 radial blades that has no pre-whirl. the tip speed of the blades is 300 m/s, and the radial component of the air velocity at the tip is 150 m/s. air is inducted at 101.3 kpa and a stagnation temperature of 305 k. the mass flow rate is 3 kg/s. consider the power input factor to be equal to 1.04 and a stagnation temperature at the compressor exit of 370 k, if the flow is isentropic. assume cp-1005 j/kg.k. find the power input to the compressor (in kw)
Answers: 3
You know the right answer?
Note that common activities are listed toward the top, and less common activities are listed toward...
Questions
Questions on the website: 13722363