Engineering, 26.10.2020 17:00 ctdavis
2.You are provided following watershed schematic. Find the peak discharge for each inlet and the required discharge for the pipe. Use the 50-yr return period and the IDF curve from Baltimore Orange County non-mountainous
Answers: 3
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
Engineering, 04.07.2019 18:10
The higher the astm grain size number, the finer the gran is. a)-true b)-false
Answers: 2
Engineering, 06.07.2019 03:30
Abrayton cycle operates with a regenerator on the air-standard with properties evaluated at 400 k. the tem- perature of the air entering the compressor is 350k while the temperature of the air exiting the compressor is 600 k. the temperature of the air entering the turbine is 1600 k. the overall cycle produced 600 kj/kg of net work out. assuming a regenerator effectiveness of 0.8, what is the temperature of the air before heat addition (combustion)? draw this process on a t - s diagram
Answers: 3
Engineering, 06.07.2019 04:30
State two advantages and two disadvantages of interchangeability.
Answers: 3
2.You are provided following watershed schematic. Find the peak discharge for each inlet and the req...
Computers and Technology, 02.03.2020 17:16
Computers and Technology, 02.03.2020 17:16
English, 02.03.2020 17:17