What is the standard lettering height of lowercase letters when used in combination with uppercase letters? A.
Lowercase letters must be about one-fourth the height of uppercase letters.
B.
Lowercase letters must be about twice the width of uppercase letters.
C.
The lower part of the lowercase letter must be about two-thirds the height of the capital letter.
D.
The upper part of the lowercase letter must be about two-thirds the height of the capital letter.

When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.