subject
Engineering, 19.10.2020 19:01 2002boo13

A liquid mixture containing 18.0 wt% water, 37.0 wt% methanol, 17.0 wt% ethanol, and the balance propanol is fed at 250.0 lbm/min into an evaporator operating at steady state. Two streams exit the evaporator: a vapor stream and a liquid stream, both of which contain all four components. The mass fraction of methanol in the vapor stream is 0.440 , the mass fraction of propanol in the liquid stream is 0.410 , and 60.0 % of the ethanol in the feed stream ends up in the vapor stream. The ratio of the total mass flow rate of the vapor exit stream to the total mass flow rate of the liquid exit stream is 1.26 . Required:
a. Draw and label a flow sheet for the process.
b. Label the total flow rate of each stream with a unique symbol.
c. Label the mole fractions in each stream with unique symbols.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 15:10
If you were designing a bumper for a car, would you prefer it to exhibit elastic or plastic deformation? why? consider the functions of a bumper in both a minor "fender-bender" and a major collision.
Answers: 1
question
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
question
Engineering, 04.07.2019 18:20
How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s
Answers: 2
question
Engineering, 04.07.2019 18:20
Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.
Answers: 3
You know the right answer?
A liquid mixture containing 18.0 wt% water, 37.0 wt% methanol, 17.0 wt% ethanol, and the balance pro...
Questions
Questions on the website: 13722367