Engineering, 17.10.2020 14:01 130005401

A general contractor has received plans for a new high-rise hotel in an urban area. The hotel will be 12 stories tall and will have 144 rooms. The contractor is preparing to make a bid on the project. Among the usual specifications for a high-rise building, the plans detail specifications for a friction pile foundation and a glass curtain wall. First, identify the type of construction (residential, commercial, or industrial) and explain why it fits into that category. Next, explain what materials will be needed for each of the specifications in the plan and what workers will be required to install those materials. Finally, identify how carpenters and ironworkers will contribute to the project and what materials they will need to do their jobs.

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 03:10

What precautions should you take to prevent injuries when dealing with heavy loads?

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented

Answers: 2

Answer

You know the right answer?

A general contractor has received plans for a new high-rise hotel in an urban area. The hotel will b...

Questions