subject
Engineering, 16.10.2020 01:01 bain80

Consider a LTI system with input f(t) and output y(t) that can be represented by the strictly-proper first-order differential equation dy/dt + 1/tau y(t) = K/tau f(t), where K and r are tau constant parameters.
State the characteristic equation and find its characteristic root lambda. A characteristic root lambda maybe real or complex valued. If the real part of lambda Ls strictly negative, then the corresponding natural (or characteristic) mode e^lambda t exponentially decays to zero as t increases. In this case the time constant associated with the natural mode is defined as lambda = -1/Re(lambda). The time constant tau is a measure of how quickly a natural mode relaxes towards zero. The smaller tau is, the faster the mode decays.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
question
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
question
Engineering, 04.07.2019 18:10
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
question
Engineering, 06.07.2019 03:10
List and describe the attached tools in boxford cnc milling machine? and how many tools were used in your projects explain them?
Answers: 3
You know the right answer?
Consider a LTI system with input f(t) and output y(t) that can be represented by the strictly-proper...
Questions
question
Mathematics, 13.10.2020 20:01
question
Mathematics, 13.10.2020 20:01
question
Social Studies, 13.10.2020 20:01
question
Mathematics, 13.10.2020 20:01
Questions on the website: 13722363