Engineering, 15.10.2020 08:01 ryliepeloquinf

A proposed steam power plant design consists of an ideal Rankine cycle with reheat and regeneration. Steam enters Turbine 1 at P1 and T1 at the rate of m1 and exits at P2. A fraction (y') of the steam exiting Turbine 1 is diverted to an open feedwater heater while the remainder is reheated to T3 before entering Turbine 2. The condenser operates at P4. Saturated liquid exits the condenser and is fed to Pump 1. The outlet of Pump 1 is fed into the open feedwater heater. Saturated liquid exits the feedwater heater and is fed to Pump 2. All turbines and pumps are isentropic. m1 (kg/s) = 50
P1 (Bar) = 160
T1 (oC) = 640
P2 (Bar) = 10
T3 (C) = 600
P4 (Bar) = 1
P5 (Bar) = 0.06

Required:
a. Determine the specific enthalpy (kJ/kg) at the inlet of turbine 1.
b. Determine the specific enthalpy (kJ/kg) at the exit of turbine 1.
c. Determine the specific enthalpy (kJ/kg) at the inlet of turbine 2 .
d. Determine the specific enthalpy (kJ/kg) at the exit of turbine 2.
e. Determine the specific enthalpy (kJ/kg) at the condenser exit.

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 03:10

What precautions should you take to prevent injuries when dealing with heavy loads?

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Which of the following refers to refers to how well the control system responds to sudden changes in the system. a)-transient regulation b)- distributed regulation c)-constant regulation d)-steady-state regulation

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Ifa component is made of two or more materials with different modulus of elasticity (e), it is called a composite member and we calculate the factor·n". mention the formula for calculating n". also, ifn> 1, explain what will happen to the 1. transformed.gi) ifn 1, what will happen to the material when transformed material when

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Refrigerant-134a enters the compressor of a refrigerator as superheated vapor at 0.14 mpa and -10°c at a rate of 0.05 ka/s and leaves at 0.8 mpa and 50°c. the refrigerant is cooied in the condenser to 0.72 mpa and 26'c. it is then throttled to 0.15 mpa. sketch the t-s diagram for the system and evaluate: 6) the rate of heat removai from the refrigerated space (kw), it) the power input to the compressor (kw), ii) the isentropic efficiency of the compressor (%), and iv) the cop of the refrigerator.

Answers: 2

Answer

You know the right answer?

A proposed steam power plant design consists of an ideal Rankine cycle with reheat and regeneration....

Questions