An industrial overhead door has sprocket and chain system designed to reduce the force needed by an operator to open and close the door. The system consists of two individual systems that are connected through a live axle shaft. To operate the door, the operator pulls a continuous loop of chain over a fixed 22-tooth sprocket that is attached to a live axle shaft (system 1). A second 22-tooth sprocket is attached to the live axle shaft and uses a chain connected to a 48-tooth sprocket that is attached to a drum that drives the door. What is the overall system gear ratio?

answer:

I dont think you should be doing this lol, this isn´t the right spot for this

Explanation:

One of the benefits of working with chlorinated polyvinyl chloride (CPVC) pipe is that it can be cut with a variety of different tools that don’t require any electricity or heat. However, different cutting methods are preferred over others, depending on the application.

When cutting CPVC pipe, it is important to make a square, flat cut. An uneven cut limits the bonding area and weakens the fitting.

To help you make the best possible cut, we’ve put together the following dos and don’ts when cutting CPVC pipe in different situations.