Engineering, 12.10.2020 14:01 ASTROBOY1
A 3.6 kg piece of aluminum metal(c=900 J/kg°C) at 120°C is placed in 7.00 liters of water. If the system reaches a final temperature of 30°C, what was the heat transferred by the aluminum?
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)
Answers: 1
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
Engineering, 04.07.2019 19:10
Starting wih an energy balance on a rectangular volume element, derive the one- dimensional transient heat conduction equation for a plane wall with constant thermal conductivity and no heat generation.
Answers: 1
Engineering, 06.07.2019 03:10
Oxygen at 300 kpa and 400 k is in a closed system with an initial volume of 0.1 m3. is now compressed in a polytropic process, with exponent of n 1.2, to a temperature of 500 k. calculate: a) the boundary work done during the compression, in kj b) the heat transfer during the compression, in kj
Answers: 3
You know the right answer?
A 3.6 kg piece of aluminum metal(c=900 J/kg°C) at 120°C is placed in 7.00 liters of water. If the sy...
Questions
Spanish, 12.01.2021 14:00
English, 12.01.2021 14:00
Social Studies, 12.01.2021 14:00
Chemistry, 12.01.2021 14:00
Biology, 12.01.2021 14:00
Engineering, 12.01.2021 14:00
Biology, 12.01.2021 14:00
