subject
Engineering, 12.10.2020 14:01 Jessietorres2123

Fresh air containing 4.00 mole% water is to be cooled and dehumidified to a water content of 1.70 mole% H2O, A stream of fresh air is combined with a recycle stream of previously dehumidified air and passed through the cooler. The blended stream entering the unit contains 2.30 mole% H2O. In the air conditioner, some of the water in the feed stream is condensed and removed as liquid. A fraction of the dehumidified air leaving the cooler is recycled and the remainder is delivered to a room. Taking 100 mol of dehumidified air delivered to the room as a basis of calculation, calculate the moles of fresh feed, moles of water condensed, and moles of dehumidified air recycled. (a) Draw and label the diagram for this process. In labelling the diagram, take
(b) For the system box consisting of the whole process, do a degree of into account quantities that you are asked for in the rest of this question. freedom analysis. How many degrees of freedom are there for this system
(c) Calculate the moles of the fresh feed, the moles of water condensed and the moles of dehumidified air recycled.
(d) If the unit were to be used to provide dehumidified and cooled air at a rate box? of 100 mol min1, and if the condensed water were to be collected in a 1L container, how long would it take to fill up the container? 3 Marks]

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 14:10
The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite
Answers: 3
question
Engineering, 04.07.2019 18:10
Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)
Answers: 1
question
Engineering, 04.07.2019 18:20
An open feedwater heater operates at steady state with liquid entering at inlet 1 with t? = 40°c and pl = 1 .2 mpa. water vapor att2-200°c and p2 = 1.2 mpa enters at inlet 2. saturated liquid water exits with a pressure of pa 1.2 mpa. neglect heat transfer with the surroundings and all kinetic and potential energy effects, determine the mass flow rate of steam at inlet 2 if the mass flow rate of liquid water at inlet 1 is given as 2 kg/s.
Answers: 3
question
Engineering, 04.07.2019 18:20
Aheavily insulated piston-cylinder device contains 0.02 m3 of steam at 300 kpa and 200 °c. 1.2 mpa. d this process. team is now compressed in a reversible manner to a pressure of etermine the entropy change and the work done on the steam during this process
Answers: 1
You know the right answer?
Fresh air containing 4.00 mole% water is to be cooled and dehumidified to a water content of 1.70 mo...
Questions
question
Mathematics, 02.08.2019 14:30
question
Mathematics, 02.08.2019 14:30
question
Mathematics, 02.08.2019 14:30
Questions on the website: 13722367