subject
Engineering, 08.10.2020 14:01 danielahchf

Consider two long, slender rods of the same diameter but different materials. One end of each rod is attached to a base surface maintained at 100 C, while the surfaces of the rods are exposed to ambient air at 20 C. By traversing the length of each rod with a thermocouple, it was observed that the temperatures of the rods were equal at the positions xA 0.15 m and xB 0.075 m, where x is measured from the base surface. If the thermal conductivity of rod A is known to be kA 70 W/m K, determine the value of kB for rod B.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false
Answers: 1
question
Engineering, 04.07.2019 18:10
The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody
Answers: 2
question
Engineering, 04.07.2019 18:10
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
question
Engineering, 04.07.2019 18:10
An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0
Answers: 3
You know the right answer?
Consider two long, slender rods of the same diameter but different materials. One end of each rod is...
Questions
question
Mathematics, 14.10.2020 21:01
question
Mathematics, 14.10.2020 21:01
Questions on the website: 13722363