subject
Engineering, 23.09.2020 19:01 hdkdkdbx

Why, do you suppose, an architect must have a minimum of a bachelor's degree, be licensed in every state, and often encouraged to pursue advanced degrees or additional professional training? Select all that apply.
Architects must maintain a level of professional care and attention to detail that assures their designs meet with accepted standards.
Architects need not have a bachelor's degree; many become licensed through apprentice programs.
Technology continues to influence building design by making it possible to produce new, stronger building materials and architects must
be aware of the use and limitations of new materials
The licensing provisions for architects typically require a minimum of a bachelor's degree in design and related coursework to assure all
graduates have approximately equal training and knowledge

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.
Answers: 1
question
Engineering, 04.07.2019 18:10
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
question
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
question
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
You know the right answer?
Why, do you suppose, an architect must have a minimum of a bachelor's degree, be licensed in every s...
Questions
question
Mathematics, 04.05.2021 04:20
question
Chemistry, 04.05.2021 04:20
question
Mathematics, 04.05.2021 04:20
Questions on the website: 13722367