Engineering, 22.09.2020 21:01 Hannahdavy5434
What statement provides an example of designing a solution in the technological design process? 1. Aerospace engineers need a lightweight material to build a jet. 2. Engineers determine which features the material must have. 3. Engineers test a carbon-plastic compound in a wind tunnel. 4. The carbon-plastic compound is redesigned to save maximum energy.
Answers: 2
Engineering, 04.07.2019 18:10
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
Engineering, 04.07.2019 18:20
Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]
Answers: 1
Engineering, 04.07.2019 19:10
An engine, weighing 3000 n, is supported on a pedestal mount. it has been observed that the engine induces vibration into the surrounding area through its pedestal at the maximum operating speed. determine the stiffness of the dynamic vibration absorber spring in (n/m) that will reduce the vibration when mounted on the pedestal. the magnitude of the exciting force is 250 n, and the amplitude of motion of the auxiliary mass is to be limited to 2 mm note: in this question type-in right numbers, no decimals, no fractions, no unit. approximate to right number if needed
Answers: 3
Engineering, 04.07.2019 19:20
Aseries piping system conveys methyl alcohol. the system consists of 70 m of 1- nominal pipe follow by 50 m of 2-nominal pipe, both schedule 40 commercial steel. the 1-nominal pipe contains 3 90° elbows (regular) anda fully open gate valve, all threaded. the pressure drop through the system is 150 kpa. determine the volume flow rate through the system that is horizontally laid.
Answers: 1
What statement provides an example of designing a solution in the technological design process? 1. A...
Mathematics, 15.02.2021 23:10
Social Studies, 15.02.2021 23:10
Mathematics, 15.02.2021 23:20
Advanced Placement (AP), 15.02.2021 23:20
Biology, 15.02.2021 23:20
Mathematics, 15.02.2021 23:20
English, 15.02.2021 23:20
Mathematics, 15.02.2021 23:20
Chemistry, 15.02.2021 23:20
Health, 15.02.2021 23:20
Mathematics, 15.02.2021 23:20
Mathematics, 15.02.2021 23:20