Engineering, 22.09.2020 18:01 de5briz75

A cylindrical water-storage tank has a height of 7.5 m and a radius of 6.2 m. The storage tank is full of water but is vented to the atmosphere. The bottom of the tank is 29 m off the ground. A 13 cm diameter pipe runs vertically down from the tank and goes 1.8 m underground before turning horizontal. The water flow in the horizontal pipe is 87 L/s. 1. What is the water pressure (gauge) in the horizontal pipe underground?
2. How fast does the water level in the tank drop?
3. bUTch Jones drills a 6.5 mm diameter hole near the bottom of the tank. How fast does the water shoot out?
4. What volume flow of water is lost out the hole?

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

During a steady flow process, the change of energy with respect to time is zero. a)- true b)- false

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.

Answers: 1

Answer

You know the right answer?

A cylindrical water-storage tank has a height of 7.5 m and a radius of 6.2 m. The storage tank is fu...

Questions