Engineering, 22.09.2020 08:01 haileyw123
You have a wedge with the IMA of 20 and the height of 5. What is the length of the wedge? *
Answers: 1
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
Engineering, 04.07.2019 18:10
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
Engineering, 04.07.2019 18:20
Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero
Answers: 2
Engineering, 04.07.2019 18:20
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
You have a wedge with the IMA of 20 and the height of 5. What is the length of the wedge? *...
Mathematics, 14.12.2020 21:00
Mathematics, 14.12.2020 21:00
Biology, 14.12.2020 21:00
Spanish, 14.12.2020 21:00
Chemistry, 14.12.2020 21:00
Biology, 14.12.2020 21:00
Mathematics, 14.12.2020 21:00
Mathematics, 14.12.2020 21:00
Mathematics, 14.12.2020 21:00
History, 14.12.2020 21:00
Chemistry, 14.12.2020 21:00
History, 14.12.2020 21:00
Mathematics, 14.12.2020 21:00