Engineering, 20.09.2020 01:01 gggghhhhhhhhhhhh
A JFET has IDSS = 20 mA and VP = 4 V. What is the maximum drain current? The gate-source cutoff voltage? The value of RDS?
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.
Answers: 1
Engineering, 04.07.2019 19:20
Apiping systems consists of 6 m of 6-std type k and 12 m of 4-std type k, both drawn copper tubing. the system conveys ethylene glycol at a rate of 0.013 m3/s. the pressure drop across the system is to be calculated. there are two 90° elbows in the 6-in pipe, a reduction from the 6-in pipe to the 4-in pipe and four 90° elbows in the 4-in pipe. all fittings are soldered (same as flanged) and regular. the inlet and outlet of the system are at the same height.
Answers: 1
Engineering, 04.07.2019 19:20
Air at a pressure of 1atm and a temperature of 40 c is in parallel flow over the top surface of a flat plate that is heated to a uniform temperature of 120 c. the plate has a length of 0.40m (in the flow direction) and a width of 0.15m. the reynolds number based on the plate length is 50, 000. what is the rate of heat transfer from the plate to the air? if the free stream velocity of the air is doubled and the pressure is increased to 10 atm what is the rate of heat transfer?
Answers: 2
You know the right answer?
A JFET has IDSS = 20 mA and VP = 4 V. What is the maximum drain current? The gate-source cutoff volt...
Questions
Mathematics, 05.01.2020 19:31
Mathematics, 05.01.2020 19:31
Biology, 05.01.2020 19:31
Mathematics, 05.01.2020 19:31
Social Studies, 05.01.2020 19:31
History, 05.01.2020 19:31
Computers and Technology, 05.01.2020 19:31
Mathematics, 05.01.2020 19:31
History, 05.01.2020 19:31
English, 05.01.2020 19:31
History, 05.01.2020 19:31
English, 05.01.2020 19:31
Mathematics, 05.01.2020 19:31
