Engineering, 20.09.2020 18:01 wwwserban9281

please hel PROJECT: ADVERTISE YOUR FAVORITE CIVIL ENGINEERING TECHNOLOGY In this project, you will choose your favorite technology from this lesson, research more about it, and create a poster that advertises the device and will be displayed at a civil engineering conference. Your job is to try to entice the engineers to buy your technology, so you should make it look as attractive and useful as possible. Make sure to highlight all of its positive aspects. To complete this assignment, you should do the following: Choose one of the tools discussed in this lesson that you want to investigate further. Research more about the use, history, and design of your tool. You may use either online or library resources, but you must use a total of at least two sources. If you are not sure where to begin, start with the appropriate resources from this lesson. Design a poster on one sheet of poster board that is at least 22" by 28". Your poster must include the following: a description of how the tool is helpful to the engineer an explanation of the science behind the technology a brief history of the tool, including the name of the inventor(s) and the date of the invention a picture of the object Submit your poster with a list of the references that you used attached to the back. here are the choices anemometer altimeter planimeter theodolite

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented

Answers: 2

Answer

You know the right answer?

please hel PROJECT: ADVERTISE YOUR FAVORITE CIVIL ENGINEERING TECHNOLOGY In this project, you will c...

Questions