Engineering, 03.09.2020 01:01 125712

Complete the sentences with the correct present tense forms of the verbs in parentheses. Modèle Je parle (parler) français en classe. incorrectQuestion 1 with 1 blankNous You Answered nearnearIncorrect or extra word (habiter) près de (near) l'école. correctQuestion 2 with 1 blankIls You Answered aiment Correct Answer isaiment (aimer) le cours de sciences politiques. incorrectQuestion 3 with 1 blankVous You Answered or extra word (manger) en classe?! incorrectQuestion 4 with 1 blankLe cours You Answered or extra word (commencer) à huit heures (at eight o’clock). incorrectQuestion 5 with 1 blankMarie-Claire You answered(blank) (chercher) un stylo. incorrectQuestion 6 with 1 blankNous You answered(blank) (partager) un crayon en cours de maths. incorrectQuestion 7 with 1 blankTu You answered(blank) (étudier) l’économie. incorrectQuestion 8 with 1 blankLes élèves You answered(blank) (voyager) en France. incorrectQuestion 9 with 1 blankNous You Answered adorentadorentIncorrect or extra word (adorer) parler italien.

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

Answer

Engineering, 04.07.2019 18:10

During a steady flow process, the change of energy with respect to time is zero. a)- true b)- false

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i.d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.

Answers: 3

Answer

Engineering, 04.07.2019 19:10

Ahelical coil spring has a mean diameter of 50 mm, a wire diameter of 5.5 mm and is wound with a pitch of 10 mm. the spring steel has an ultimate strength of 1250 mpa. find the force needed to compress the spring solid and the wire stress in this condition. state whether the spring will return to its initial length.

Answers: 1

Answer

You know the right answer?

Complete the sentences with the correct present tense forms of the verbs in parentheses. Modèle Je p...

Questions