subject
Engineering, 02.09.2020 04:01 karankhatri1946

Verify concepts of phase equilibrium and phase transition using the steam tables. A. Establish by direct calculation this equality between molar Gibbs free energies for steam at 2.5 MPa and 224 oC : Gl = GvB. Calculate Gv at 2.5 MPa for temperatures between 225 and 400 oC and extrapolate this curve below 224 oC. C. Find Gl at 160, 170, 180, 190, 200, and 210 oC. Plot in the same graph used for part b and extrapolate above 224 oC. Hint: for a liquid, H and S can be taken as independent of P. D. Plot the molar volume V vs. T at P = 2.5 MPa over the T range between 150 and 400 oC, and show that V is discontinuous. E. Plot Cp vs. T at P =2.5 MPa over the T range between 150 and 400 oC, and show that Cp is discontinuous. F. Using the data in the steam tables, show that the Gibbs energies per unit mass of steam and liquid water in equilibrium at 300 oC are equal.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.
Answers: 1
question
Engineering, 04.07.2019 18:10
Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.
Answers: 2
question
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
question
Engineering, 04.07.2019 18:20
A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.
Answers: 3
You know the right answer?
Verify concepts of phase equilibrium and phase transition using the steam tables. A. Establish by di...
Questions
Questions on the website: 13722363