subject
Engineering, 29.08.2020 22:01 nayelidlc2

Can someone help me with these I have to write at least 200 words

2. Generate Ideas-
By generting ideas and conchepts we can say that our development should be better than others. So
we have to make something that will be shooting farther or can restart faster. What if it will restart by
special mechanism that is shooting and comming in the first position? Or how about, if it had a back
stole with balls that are comming one by one, and when it is restarting the ball comes right up. Like
that we can try out many different strings and find one that will make the ball fly farther. We can try to
change the firing angel.
3. Develop a Solution-
When we developing a solution we have to make the drawing of an object that we are engineering.
Originally catapults were made out of wood with metal adds. Now we can use plastic and other
materials to help us. Owr model will be made out of plastic and contain some kind of bungee rope.
To make it go thurther we have to add the firing angle to it and when it throws
4. Build and Test a Prototype-


Can someone help me with these

I have to write at least 200 words
2. Generate Ideas-
By gen

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
question
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
question
Engineering, 04.07.2019 18:20
Inadequate stores control is not an obstacle to effective work order system. (clo4) a)-true b)-false
Answers: 3
question
Engineering, 04.07.2019 19:10
An engine, weighing 3000 n, is supported on a pedestal mount. it has been observed that the engine induces vibration into the surrounding area through its pedestal at the maximum operating speed. determine the stiffness of the dynamic vibration absorber spring in (n/m) that will reduce the vibration when mounted on the pedestal. the magnitude of the exciting force is 250 n, and the amplitude of motion of the auxiliary mass is to be limited to 2 mm note: in this question type-in right numbers, no decimals, no fractions, no unit. approximate to right number if needed
Answers: 3
You know the right answer?
Can someone help me with these I have to write at least 200 words

2. Generate Ideas-
Questions
question
Mathematics, 30.11.2020 20:30
question
Mathematics, 30.11.2020 20:30
question
Mathematics, 30.11.2020 20:30
Questions on the website: 13722361