Engineering, 26.08.2020 06:01 ayshajabeenmeox5jrh
Explain the cooling mechanism implemented in fanless laptop
Answers: 1
Engineering, 04.07.2019 18:10
What difference(s) did you notice using a pneumatic circuit over hydraulic circuit.explain why the pneumatic piston stumbles when it hits an obstacle.
Answers: 2
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20
How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s
Answers: 2
Engineering, 04.07.2019 19:10
With increases in magnification, which of the following occur? a. the field of view decreases. b. the ambient illumination decreases. c. the larger parts can be measured. d. the eyepiece must be raised.
Answers: 1
Explain the cooling mechanism implemented in fanless laptop...
English, 27.08.2019 11:10
English, 27.08.2019 11:10
Mathematics, 27.08.2019 11:10
Social Studies, 27.08.2019 11:10
Mathematics, 27.08.2019 11:10
Biology, 27.08.2019 11:10
Mathematics, 27.08.2019 11:10
English, 27.08.2019 11:10
Mathematics, 27.08.2019 11:10
Health, 27.08.2019 11:10
Social Studies, 27.08.2019 11:10
Social Studies, 27.08.2019 11:10
History, 27.08.2019 11:10