subject
Engineering, 21.08.2020 14:01 ineedhelplolol

If the pressure on the surface of an oil tank (sp gr 0.8) is 0.2 kg / cm2, the pressure at a depth of 25 m, is

ansver
Answers: 1

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
question
Engineering, 04.07.2019 18:10
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
question
Engineering, 04.07.2019 18:20
Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above
Answers: 1
question
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
You know the right answer?
If the pressure on the surface of an oil tank (sp gr 0.8) is 0.2 kg / cm2, the pressure at a depth o...
Questions
question
Mathematics, 09.10.2019 07:30
question
English, 09.10.2019 07:30
question
Mathematics, 09.10.2019 07:30
Questions on the website: 13722367