subject
Engineering, 15.08.2020 19:01 coolkitty35

A3-kN axial load and a 7-kN radial load are loaded on a02-series single-row deep-groove ball bearing with a 65-mm bore. The outer ring rotates at 500 rpm. Determine the equivalent radial load that will be experienced by this particular bearing. Load Ratings, kNBore (mm)OD (mm)Width (mm)Deep GrooveC C0Angular ContactC C0651202355.934.063.741.5Table 1. Dimensions and load ratings for single-row 02-series deep-groove and angular-contact ball bearingsFa/(VFr) ≤eFa/(VFr) ≥eFa/C0eX1Y1X2Y20.0840.281.0000.561 .550.1100.301.0000.561.45Table 2. Equivalent radial load factors for ball bearing

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.
Answers: 1
question
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
question
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
question
Engineering, 04.07.2019 18:20
Avolume of 2.65 m3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 264 k, 5.6 bar. the air receives 432 kj by work from the paddle wheel. assuming the ideal gas model with cv = 0.71 kj/kg • k, determine for the air the amount of entropy produced, in kj/k
Answers: 2
You know the right answer?
A3-kN axial load and a 7-kN radial load are loaded on a02-series single-row deep-groove ball bearing...
Questions
question
Mathematics, 06.06.2020 00:57
Questions on the website: 13722367