Engineering, 12.08.2020 08:01 MendesArmy333

Following is the phase diagram of a hypothetical alloy, which is made by two elements B and C. The composition of the alloy is XX%C. The XX is equal to last two digits of your roll number. For example, if your roll number is MEEN19111015 then XX=15. Suppose this material is heated to 1000 oC and then cooled to 25 oC. (a)Write down the range of temperature in which two phases exist in the alloy with XX%C composition. (b) if the concentration of element C is increased, will the transformation temperature from Alpha to Beta increase or decrease?

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines

Answers: 1

Answer

Engineering, 04.07.2019 18:10

The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody

Answers: 2

Answer

You know the right answer?

Following is the phase diagram of a hypothetical alloy, which is made by two elements B and C. The c...

Questions