subject
Engineering, 12.08.2020 05:01 mia7955

What is the difference between science and engineering?

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:20
Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.
Answers: 3
question
Engineering, 06.07.2019 02:30
A12 mm diameter shaft runs in a plain cylindrical bush 30 mm long that is located in an 18 mm diameter hole in a housing. the shaft-inner bush fit is h8 f and the outer bush-housing fit is h7-p6. make a fully cimensioned sketch of the bush with tolerances. find the maximum and minimum clearance or interference for both fits on the inner and outer diameters of the bush
Answers: 3
question
Engineering, 06.07.2019 05:30
Aspring-mass system consists of a mass weighing 20 kg and a spring with stiffness of 1000 n/m. the mass is subjected to resonance by a harmonic force f(t) 20 cos wt n. the initial condition is given as the initial position 0 and the initial velocity 0. find the amplitude of the forced motion at the end of (a) 1.5 cycle and (b) 2.25 cycles
Answers: 2
question
Engineering, 06.07.2019 06:10
The high degree of flatness achieved in modern architectural plate glass is the result of the float glass process in which the layer of glass is drawn across a bath of molten tin. ( true , false )
Answers: 1
You know the right answer?
What is the difference between science and engineering?...
Questions
Questions on the website: 13722367