subject
Engineering, 25.07.2020 09:01 ayoismeisjjjjuan

An ideal Brayton refrigeration cycle has air entering at 100 kPa, 270 K. The compressor pressure ratio is 3, and the temperature at the turbine inlet is 310 K. The isentropic efficiencies of the compressor and turbine are 82% and 85 % respectively. Determine a. Net work input, per unit mass of air flow, in kJ/kg. b. Refrigeration capacity, per unit mass of air flow, in kJ/kg. c. Coefficient of performance. d. Coefficient of performance of a Carnot refrigeration cycle operating between thermal reservoirs at TC = 270 K and TH = 310 K, respectively.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
question
Engineering, 04.07.2019 18:10
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
question
Engineering, 04.07.2019 18:10
Items are similar to the free issue items, but their access is limited. (clo5) a)-bin stock items free issue b)-bin stock controlled issue c)-critical or insurance spares d)-rebuildable spares e)-consumables
Answers: 1
question
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
You know the right answer?
An ideal Brayton refrigeration cycle has air entering at 100 kPa, 270 K. The compressor pressure rat...
Questions
Questions on the website: 13722363